RE: DLSW Troubleshooting

From: John Mistichelli (jmistichelli@xxxxxxxxx)
Date: Fri Mar 08 2002 - 21:06:51 GMT-3


   
Just a REAL basic question for you...

Are you running NetBEUI on these PCs?

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Bob Sinclair
Sent: Friday, March 08, 2002 6:22 PM
To: ccielab@groupstudy.com
Subject: DLSW Troubleshooting

DLSW Experts:

I have three routers, fully meshed with tcp remote peer statements. All are
showing two connected peers. DLSW capabilities shows all three are aware of
the PC's behind the other routers, and the local pc. Yet, the PC behind R6,
on a token ring segment, cannot reach others or be reached. Even though the
other peers know it is there (reachability). Have switched PC's so I know
that is not the issue. There are no filters. Below are output of debugs.
Testing is by net view \\ on the pc's. Whenever the PC behind R6 tries to
contact another, it gets "network path not found". Same when others try to
reach it. Other two peers can reach each other fine. Bottom line, other
peers see it as reachable, but can't contact it.

Below is debug when another peer tries to reach this one. 148.6.4.4 is the
peer address of the peer trying to reach this one.

R6#
R6#
02:17:21: %DLSWC-3-RECVSSP: SSP OP = 18( NBNQ ) -explorer from peer
148.6.4.4(2065)
R6#
02:17:21: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
02:17:21: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
R6#
02:17:23: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
02:17:23: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
02:17:24: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
02:17:24: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
R6#
02:17:24: %DLSWC-3-RECVSSP: SSP OP = 18( NBNQ ) -explorer from peer
148.6.4.4(2065)
R6#
02:17:25: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
02:17:25: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
02:17:26: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
02:17:26: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
R6#
02:17:27: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
02:17:27: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90

Below is debug when this one tries to reach another. 148.6.3.3 is the peer
router of the pc name I am trying to reach.

R6#
R6#
02:18:27: DLSW Received-ctlQ : CLSI Msg : UDATA_STN.Ind dlen: 84
02:18:27: %DLSWC-3-RECVSSP: SSP OP = 19( NBNR ) -explorer from peer
148.6.3.3(2065)
02:18:27: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
02:18:27: DLSW Received-ctlQ : CLSI Msg : UDATA_STN.Ind dlen: 84
02:18:27: %DLSWC-3-RECVSSP: SSP OP = 19( NBNR ) -explorer from peer
148.6.3.3(2065)
R6#
02:18:27: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
02:18:28: DLSW Received-ctlQ : CLSI Msg : UDATA_STN.Ind dlen: 84
02:18:28: %DLSWC-3-RECVSSP: SSP OP = 19( NBNR ) -explorer from peer
148.6.3.3(2065)
R6#
02:18:28: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
R6#



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:57 GMT-3