From: Christopher M. Heffner (cheffner@xxxxxxxxxxxxxxxxxx)
Date: Sat Mar 09 2002 - 13:00:44 GMT-3
FYI ... in the newer versions of the IOS, if you forget to add the words "subne
ts" the IOS warns you that only major networks will be redistributed. Helps us
forgetful folks.
===============================================================================
===
Christopher M. Heffner
IMCR Course Director
Certified Cisco Systems Instructor
CCSI, CCIE, MCT, MCSE, MCNI, MCNE, CLI, PCLP, FCSE, ASE, CTT, A+
cheffner@certified-labs.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Paul Borghese
Sent: Saturday, March 09, 2002 9:54 AM
To: RSiddappa@NECBNS.com; ccielab@groupstudy.com
Subject: Re: OSPF and Conneted.
Make sure you use the command "subnets" in the redistribution statement. I
always forget to use this keyword and have similar results :-).
Paul Borghese
----- Original Message -----
From: <RSiddappa@NECBNS.com>
To: <RSiddappa@NECBNS.com>; <ccielab@groupstudy.com>
Sent: Saturday, March 09, 2002 8:56 AM
Subject: OSPF and Conneted.
> r1--------------------------r2----------------------------------------r3
>
> R1 in area 0 and ( OSPF)
>
> r1 and r2 in area 1 (/28) (OSPF)
>
> r2 and r3 runngin IGRP (/24)
>
> I ahve created a loop back of /28 on the R2 and summarized in OSPF and
> redistributed in to oSPF.
>
> All this is fine.
>
> I am not seeing the /24 IGRP route on r1.
>
> Do I need to do redistribute connected. If yes wwhat if they say
redistibute
> between OSFP and IGRP mutually.
>
> R.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:58 GMT-3