From: ying chang (ying_c@xxxxxxxxxxx)
Date: Tue Mar 12 2002 - 16:21:59 GMT-3
Hi,
This is a little bit tricky as you are trying to talk between two spokes. If
you add ebgp-multihop on both R2 and R3's nei command, that should solve
your problem.
Chang
>From: RSiddappa@NECBNS.com
>Reply-To: RSiddappa@NECBNS.com
>To: ccielab@groupstudy.com
>Subject: BGP RR - Problem in neighbor relation.
>Date: Tue, 12 Mar 2002 11:30:19 -0700
>
> |--------------------------R2
> |
> R1-----------Fr Multipoint---------------
> | |
> |
> E0 |---------------------------R3
> |
> |
> R4
>
> I have this strange BGP problem.
>
> R1 is the RR and R3 and R4 are clients. in AS - 10.
>
> R2 is in AS 12.
>
> I am trying to make EBGP connection between R2 and R3. They can ping
>each other and I have used the Ip address on their serail interface for
>neighbor command.
> But they are not able to for adjacencies.
>
> It is comming in to Active mode and stoping there ( I did a debug IP
>BGP
>events). Is it some thin to do with IP address from whihc the TCP
>connection
>is getting
> established.
>
> My understnding is the TCP connection will be established from the IP
>address specied in the neighbor command ot it will be from the router ID.
>
> Thnak you,
> R.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:02 GMT-3