From: Louis Young (tonyblair@xxxxxxxxx)
Date: Mon Mar 25 2002 - 22:48:12 GMT-3
r1#confi t
Enter configuration commands, one per line. End with CNTL/Z.
r1(config)#router ?
bgp Border Gateway Protocol (BGP)
egp Exterior Gateway Protocol (EGP)
eigrp Enhanced Interior Gateway Routing Protocol (EIGRP)
igrp Interior Gateway Routing Protocol (IGRP)
isis ISO IS-IS
iso-igrp IGRP for OSI networks
mobile Mobile routes
odr On Demand stub Routes
ospf Open Shortest Path First (OSPF)
rip Routing Information Protocol (RIP)
static Static routes
r1(config)#router isis
r1(config)#
----- Original Message -----
From: "Ahmed Mamoor Amimi" <mamoor@ieee.org>
To: "Louis Young" <tonyblair@etang.com>; <ccielab@groupstudy.com>
Sent: Monday, March 25, 2002 10:12 PM
Subject: Re: Weird Symptom: can not enter (config-router)# mode in ISIS and OSP
F ,why???
> Louis,
> Ur not getting into the router-mode in OSPF just because u dont have
> any interface with ip address which
> is to be assign to OSPF process.
> Secondly ur not getting into the ISIS process as ur running
> (C2600-IS-M) IPonly version. U need Enterprise
> version to run isis. You will see ISIS when u do "router ?" but will not
> able to get in to it if u dont have Enterprise version (js).
>
> -Mamoor
>
>
> ----- Original Message -----
> From: Louis Young <tonyblair@etang.com>
> To: <ccielab@groupstudy.com>
> Sent: Monday, March 25, 2002 2:38 PM
> Subject: Weird Symptom: can not enter (config-router)# mode in ISIS and OSPF
> ,why???
>
>
> > Dear all,
> > I got the following phenomena during lab routers, it is a
> 2610,pls help me out!
> >
> > Router(config)#
> > Router(config)#router ospf 10
> > Router(config)#
> > 00:18:17: %OSPF-4-NORTRID: OSPF process 10 cannot start. There must be at
> least one "up" IP interface, for OSPF to use as router ID
> > Router(config)#router isis
> > Router(config)#net 01.2222.2222.2222.00
> > ^
> > % Invalid input detected at '^' marker.
> >
> > Router(config)#^Z
> > Router#sh ver
> > 00:18:54: %SYS-5-CONFIG_I: Configured from console by console
> > Cisco Internetwork Operating System Software
> > IOS (tm) C2600 Software (C2600-IS-M), Version 12.1(10), RELEASE SOFTWARE
> (fc1)
> > Copyright (c) 1986-2001 by cisco Systems, Inc.
> > Compiled Mon 06-Aug-01 23:48 by kellythw
> > Image text-base: 0x80008088, data-base: 0x80CD6E7C
> >
> > ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
> >
> > Router uptime is 18 minutes
> > System returned to ROM by reload
> > System image file is "flash:c2600-is-mz.121-10.bin"
> >
> > cisco 2610 (MPC860) processor (revision 0x203) with 26624K/6144K bytes of
> memory.
> > Processor board ID JAD05270J95 (1358695238)
> > M860 processor: part number 0, mask 49
> > Bridging software.
> > X.25 software, Version 3.0.0.
> > 1 Ethernet/IEEE 802.3 interface(s)
> > 1 Serial network interface(s)
> > 32K bytes of non-volatile configuration memory.
> > 8192K bytes of processor board System flash (Read/Write)
> >
> > Configuration register is 0x2102
> >
> >
> > Thanks in advance.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:22 GMT-3