From: Hansang Bae (hbae@xxxxxxxxxx)
Date: Tue Apr 02 2002 - 21:31:23 GMT-3
At 05:31 AM 4/1/2002 -0800, gabi N wrote:
>I have a xyplex 1600 with flash, some manuals, but i
>haven't succeed in making the right configuration.
>Can anybody help me with a working config ?
You can just use the rollover cable to the CONSOLE port. And you can use the s
ame console cable (and adapter) to connect to the Xyplex from your PC. (you on
ly need the last part for the ports to work, but here's the usual config:
(the ports are 2000 + (100*port)) Double check it as it's been quite a while.
# Set the time manually during implementation
SET SERVER DATE dd mmm yyyy
SET SERVER TIME hh:mm:ss
#
Set the login password (Default=ACCESS)
DEF SERVER LOGIN PASSWORD "foobar"
#
Set the maintenance password (Default=SYSTEM)
DEF SERVER MAINTENANCE PASSWORD "foobar"
#
Set the maintenance password. (Default=SYSTEM)
DEF SERVER PRIVILEGED PASSWORD "foobar"
#
# SERVER CHANGE ENABLE allows you to type in
# DEF command and it will automatically issue
# the SET command.
set server change enable
def server internet address 192.168.1.5
def server internet subnet mask 255.255.255.0
def server internet primary gateway address 192.168.1.1
def server internet secondary gateway address 192.168.1.1
def server identification "DMZ-TRMSRVR-BLDG1"
def server welcome "For Authorized Use Only!"
def server name DMZ-TRMSRVR-BLDG1
def prompt "DMZ-TRMSRVR-BLDG-1"
#
def port 1 name TO-DMZ1-SWITCH
def port 1 flow control disabled
def port 1 speed 9600
def port 1 access dynamic
hsb
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:52 GMT-3