From: David Luu (wicked01@xxxxxxxxxxxxx)
Date: Sun Apr 21 2002 - 18:46:07 GMT-3
the only way to change the external distance is with the distance eigrp
[internal-distance] [external-distance]...you could leave the internal
distance at 90 - default and change the external to whatever you want
At 01:50 AM 4/22/2002 +0500, Ahmed Mamoor Amimi wrote:
>Sir,
> I guess u havnt read my post in detail.... i have told in that i am
>able to that with the command but it only change for internal and NOT FOR
>EXTERNAL. if i am wrong then can u please post a working config of it......
>
>I will be waiting !!
>
>-Mamoor
>
>
>----- Original Message -----
>From: Krucker, Louis <louis.krucker@sunrise.net>
>To: 'Ahmed Mamoor Amimi ' <mamoor@ieee.org>; <ccielab@groupstudy.com>
>Sent: Sunday, April 21, 2002 11:53 PM
>Subject: RE: Distance change of Eigrp
>
>
> > Hello,
> >
> > Try
> >
> > router eigrp 100
> > distance 200 [advertised router] [0.0.0.0] [ACL nr.]
> >
> > access-list 1 permit [route table entry]
> >
> > regards
> > Louis
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: Ahmed Mamoor Amimi
> > To: ccielab@groupstudy.com
> > Sent: 21.04.2002 04:25
> > Subject: Distance change of Eigrp
> >
> > I want to change only the external admin distance of Eigrp protocol with
> > out
> > using the distance eigrp <autonomous> command.
> >
> > I tried to change the ospf and it worked. anyone have idea about this if
> > so
> > then please let me know. Thanks
> >
> > -Mamoor
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:15 GMT-3