From: Krucker, Louis (louis.krucker@xxxxxxxxxxx)
Date: Tue Apr 23 2002 - 09:50:47 GMT-3
I think my question was not clear.
Lets say i have a ip phone and a callmanager, 2 routers between them.
IPPhone ethernet RouterA Frame RouterB ethernet Callmanager
X-------------------R-----------------------R------------------------X
IP Phone need rsvp bandwith for voice on callmanager, i configure
on Router A ip rsvp bandwith blah blah, did i need to configure rsvp
bandwith
on Router B as well?
Do i need the command ip rsvp bandwith only if the
connection is established by callmanager or do i need it
anyway on both ends of a point to point connection for rsvp?
Thanks for help in advance
Regards
Louis
-----Original Message-----
From: Dennis [mailto:cc13@attbi.com]
Sent: Dienstag, 23. April 2002 14:18
To: Krucker, Louis; ccielab@groupstudy.com
Subject: RE: RSVP
If you would follow the posts on this list you would have seen the post
yesterday about rsvp stating that it must be configured on all intermediate
routers between two end points.
Dennis
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Krucker, Louis
Sent: Tuesday, April 23, 2002 7:26 AM
To: 'ccielab@groupstudy.com'
Subject: RSVP
Hi group
I have a basic question about rsvp:
Is it necessary to configure rsvp on both sides of a link ?
Mit freundlichen Gr|ssen
Louis Krucker
sunrise
Network Support Engineer
Wireline Data
TDC Schweiz AG
Phone: +41 1 555 67 15
Mobile: +41 76 555 67 15
E-Mail: louis.krucker@sunrise.net
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:17 GMT-3