From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Thu Apr 25 2002 - 06:06:31 GMT-3
Oh !! forgot about the queue ..... i guess its source-bridge tcp-queue-max
xxx
example :
If, for example, your network experiences temporary bursts of traffic using
the default packet queue length, the following command raises the limit from
100 to 150 packets:
source-bridge tcp-queue-max 150
And if ur looking for explorer depth for the TR interface then :
The following example sets the maximum explorer queue depth:
source-bridge explorerq-depth xxx
If the question is under dlsw section then conside the second command.
-Mamoor
----- Original Message -----
From: Alex Paulino <Alex@2s.com.br>
To: <ccielab@groupstudy.com>
Sent: Thursday, April 25, 2002 10:59 AM
Subject: DLSW quaranteed bandwidth
> Hi folks, somebody knows how to configure a serial link to guaranteed 20
% of
> available bandwidth to Dlsw traffic and how to set the maximum messages
for a
> output queue?
>
> I think the better sollutions is using CBWFQ and WRED, but i dont know how
to
> do it.
>
> thanks
>
> alex
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:19 GMT-3