From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Sun May 12 2002 - 06:26:52 GMT-3
Morning Guys !!
Is my way of redistribution correct please confirmed after reading this :
r1------(eigrp)-------r2------(ospf)-------r3
r1 running eigrp
r2 running eigrp and ospf
r3 running ospf
r1 have routes 1,2,3
r3 have routes 4,5,6,7,8,9,10,11,12,13,14,15 (lots of routes)
on r2 i will redistribute and be specific that no route loop is formed so i
use route-map in redistribution.
i made a route-map on r2 which only calls eigrp routes
route-map eigrp
match ip address 1
access-list 1 permit 1
access-list 1 permit 2
access-list 1 permit 3
for ospf i dont make access-list but instead i denied 1,2,3 and allow others ,
like :
route-map ospf deny 10
match ip address 1
route-map ospf permit 20
ospf route-map is calling that same access-list that is made for eigrp but
here this access-list is denied and rest are permitted.
Is this the correct way or i should make an access-list for ospf and call
4,5,6,7,8,9,10,11,12,13,14,15 (takes lot of time) and apply it to the ospf
route-map.
Just want to make sure .....
waiting for comments.
-Mamoor
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:55 GMT-3