From: David Ham (ccieau@xxxxxxxxxxx)
Date: Wed May 15 2002 - 08:19:10 GMT-3
My lab is at home sometime I dial into my home to access routers.
Here is my config for the aux setting. Hope this help.
enable password test
!
username test password 0 test
line aux 0
exec-timeout 0 0
password test
login
modem InOut
modem autoconfigure discovery
terminal-type ANSI
transport input all
stopbits 1
rxspeed 38400
txspeed 38400
flowcontrol hardware
Regards,
David Ham
Data specialist
OPTUS
>From: "chenyan" <chenyan@deeptht.com.cn>
>Reply-To: "chenyan" <chenyan@deeptht.com.cn>
>To: "ccielab" <ccielab@groupstudy.com>
>Subject: how to shutdown the aux?
>Date: Wed, 15 May 2002 18:32:24 +0800
>
>My lab device is in my office, so I want to dial to the lab device from
>some aux port connecting to a modem, but after my practice, I dont hope the
>router with the aux does not answer any call any more even though they are
>powered.
>HOW?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:57 GMT-3