From: acarswell (acarswell@xxxxxxxxx)
Date: Thu May 23 2002 - 11:38:02 GMT-3
I just took the lab a few weeks ago. I took about 20 minutes at the start
to read through the exam and I think it was worth it. If I had just plowed
into the thing without getting a feel for the "big picture" I would have had
to spend time reconfiguring things later on in the exam.
Unfortunately, I did not pass the darned thing, but reading through the test
first helped me to calm down before I got started.
Todd Carswell
>On Thu, 23 May 2002 09:54:07 -0400 "Brent D. Stewart"
<brent@stewart.hickory.nc.us> wrote.
>My personal opinion is that I'd rather have the time to work. I'd look
>through it briefly -give yourself a moment to calm down and evaluate the
>whole test. Don't make a big complicated diagram; just make little quickie
>diagrams as needed. The Cisco supplied diagrams are sufficient for most
>things. Save the time for work.
>
>I know that this runs against the conventional wisdom, but that's my
>opinion. Take it with a grain of salt until you see numbers after my name!
>
>Brent
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Peter
>van Oene
>Sent: Thursday, May 23, 2002 8:51 AM
>To: Christopher E. Miller; ccielab@groupstudy.com
>Subject: Re: To all who have sat at least once...
>
>Read it twice. It's not that long a read, and you really need to
>understand the whole picture.
>
>At 10:35 PM 5/22/2002 -0500, Christopher E. Miller wrote:
>>Is there any real advantage to reading through the entire test first????
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:06 GMT-3