VoIPoFR RSVP

From: Joe Jia (ellenjjl@xxxxxxxxxx)
Date: Sat May 25 2002 - 10:33:50 GMT-3

• Next message: Jihene Bouraoui: "lab swap in brussels, date 6 august, need a date scheduled for en d of september"
• Previous message: Jonathan Natale: "RE: route tag"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi,

When I am doing RSVP for VoIPoFR, I find the following configuration doesn't
work. Could
someone help me? And which time I can say some information from " Show ip rsvp
installed"?

Thanks,
Joe

interface Serial2/0
 bandwidth 800
 no ip address
 encapsulation frame-relay
 no fair-queue
 no arp frame-relay
 no frame-relay inverse-arp
 frame-relay lmi-type cisco
 frame-relay traffic-shaping
 ip rsvp bandwidth 350 350
!
interface Serial2/0.1 multipoint
 ip address 165.10.3.4 255.255.255.0
 frame-relay map bridge 130 broadcast
 frame-relay map ip 165.10.3.2 120 broadcast
 frame-relay map ip 165.10.3.3 130 broadcast
 frame-relay interface-dlci 130
 class fr_voip
 ip rsvp bandwidth 350 350
!
!
map-class frame-relay fr_voip
 frame-relay cir 800000
 frame-relay bc 8000
 frame-relay be 0
 frame-relay mincir 128000
 no frame-relay adaptive-shaping
 frame-relay fair-queue
 frame-relay fragment 80
 !
voice-port 3/0/0
!
voice-port 3/0/1
!
dial-peer cor custom

!
!
dial-peer voice 410 voip
 destination-pattern 110
 session target ipv4:165.10.126.6
 req-qos controlled-load
 acc-qos controlled-load
 ip precedence 5
!
dial-peer voice 44 pots
 destination-pattern 111
 port 3/0/0
!

• Next message: Jihene Bouraoui: "lab swap in brussels, date 6 august, need a date scheduled for en d of september"
• Previous message: Jonathan Natale: "RE: route tag"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:07 GMT-3