From: David Luu (wicked01@xxxxxxxxxxxxx)
Date: Tue Jun 25 2002 - 05:52:37 GMT-3
in a few words...if it cant route, it bridges
configuration is exactly the same as on a router (fallback bridging can
also be done on a normal router)
bridge 1 protocol vlan-bridge
int e0
bridge-group 1
At 08:53 AM 6/25/2002 +0100, steven.j.nelson@bt.com wrote:
>So would you care to elborate on fallback bridging and how to configure it
>on the 3550
>
>Thanks
>
>Steve
>
>-----Original Message-----
>From: David Luu [mailto:wicked01@ix.netcom.com]
>Sent: 24 June 2002 23:41
>To: Eric Rogers; ccielab
>Subject: Re: !!!For the curious Minds; Here's The 3550-EMI Top Level
>Commands!!!
>
>
>i dont see how this would effect the lab, its just another router/switch
>being thrown in to the mix...you should already know how to configure a
>router, i dont see how this is any different
>
>At 03:06 PM 6/24/2002 -0700, Eric Rogers wrote:
> >Just got a new 3550-EMI 24port.
> >Check the sh ip portion. Yep, it's an IP router!
> >Looks like this little bad boy could actually throw a rather large monkey
> >wrech into the works.
> >
> >-Eric
> >
> >###########################################################################
>#
> >3550-EMI#?
> >Exec commands:
> > access-enable Create a temporary Access-List entry
> > access-template Create a temporary Access-List entry
> > archive manage archive files
> > cd Change current directory
> > clear Reset functions
> > clock Manage the system clock
> > cluster cluster exec mode commands
> > configure Enter configuration mode
> > connect Open a terminal connection
> > copy Copy from one file to another
> > debug Debugging functions (see also 'undebug')
> > delete Delete a file
> > dir List files on a filesystem
> > disable Turn off privileged commands
> > disconnect Disconnect an existing network connection
> > dot1x IEEE 801.1X commands
> > enable Turn on privileged commands
> > erase Erase a filesystem
> > exit Exit from the EXEC
> > format Format a filesystem
> > fsck Fsck a filesystem
> > help Description of the interactive help system
> > lock Lock the terminal
> > login Log in as a particular user
> > logout Exit from the EXEC
> > mkdir Create new directory
> > more Display the contents of a file
> > mrinfo Request neighbor and version information from a
>multicast
> > router
> > mrm IP Multicast Routing Monitor Test
> > mstat Show statistics after multiple multicast traceroutes
> > mtrace Trace reverse multicast path from destination to source
> > name-connection Name an existing network connection
> > no Disable debugging functions
> > ping Send echo messages
> > pwd Display current working directory
> > rcommand Run command on remote switch
> > reload Halt and perform a cold restart
> > rename Rename a file
> > resume Resume an active network connection
> > rmdir Remove existing directory
> > rsh Execute a remote command
> > send Send a message to other tty lines
> > setup Run the SETUP command facility
> > show Show running system information
> > systat Display information about terminal lines
> > telnet Open a telnet connection
> > terminal Set terminal line parameters
> > test Test subsystems, memory, and interfaces
> > traceroute Trace route to destination
> > tunnel Open a tunnel connection
> > udld UDLD protocol commands
> > undebug Disable debugging functions (see also 'debug')
> > verify Verify a file
> > vlan Configure VLAN parameters
> > vmps VMPS actions
> > where List active connections
> > write Write running configuration to memory, network, or
> >terminal
> >
> >###########################################################################
>#
> >###########
> >
> >3550-EMI#sh ip ?
> > access-lists List IP access lists
> > accounting The active IP accounting database
> > aliases IP alias table
> > arp IP ARP table
> > cache IP fast-switching route cache
> > cef Cisco Express Forwarding
> > dvmrp DVMRP information
> > eigrp IP-EIGRP show commands
> > flow NetFlow switching
> > igmp IGMP information
> > interface IP interface status and configuration
> > irdp ICMP Router Discovery Protocol
> > local IP local options
> > masks Masks associated with a network
> > mcache IP multicast fast-switching cache
> > mpacket Display possible duplicate multicast packets
> > mrm IP Multicast Routing Monitor information
> > mroute IP multicast routing table
> > msdp Multicast Source Discovery Protool (MSDP)
> > nat IP NAT information
> > ospf OSPF information
> > pim PIM information
> > prefix-list List IP prefix lists
> > protocols IP routing protocol process parameters and statistics
> > redirects IP redirects
> > rip IP RIP show commands
> > route IP routing table
> > rpf Display RPF information for multicast source
> > sdr Session Directory (SDPv2) cache
> > sockets Open IP sockets
> > traffic IP protocol statistics
> > vrf VPN Routing/Forwarding instance information
> >
> >###########################################################################
>#
> >################
> >
> >3550-EMI(config)#?
> >Configure commands:
> > aaa Authentication, Authorization and
>Accounting.
> > access-list Add an access list entry
> > alias Create command alias
> > arp Set a static ARP entry
> > banner Define a login banner
> > boot Boot Commands
> > bridge Bridge Group.
> > buffers Adjust system buffer pool parameters
> > cdp Global CDP configuration subcommands
> > class-map Configure QoS Class Map
> > clock Configure time-of-day clock
> > cluster Cluster configuration commands
> > default Set a command to its defaults
> > default-value Default character-bits values
> > define interface range macro definition
> > dnsix-dmdp Provide DMDP service for DNSIX
> > dnsix-nat Provide DNSIX service for audit trails
> > dot1x IEEE 802.1X subsystem
> > downward-compatible-config Generate a configuration compatible with
>older
> > software
> > enable Modify enable password parameters
> > end Exit from configure mode
> > errdisable Error disable
> > exception Exception handling
> > exit Exit from configure mode
> > file Adjust file system parameters
> > help Description of the interactive help system
> > hostname Set system's network name
> > interface Select an interface to configure
> > ip Global IP configuration subcommands
> > key Key management
> > line Configure a terminal line
> > logging Modify message logging facilities
> > mac Global MAC configuration subcommands
> > mac-address-table Configure the MAC address table
> > map-class Configure static map class
> > map-list Configure static map list
> > mls Global Multi-Layer Switching parameters
> > monitor Configure SPAN monitoring
> > mvr Enable/Disable MVR on the switch
> > no Negate a command or set its defaults
> > ntp Configure NTP
> > policy-map Configure QoS Policy Map
> > port-channel EtherChannel configuration
> > priority-list Build a priority list
> > privilege Command privilege parameters
> > process-max-time Maximum time for process to run before
> > voluntarily relinquishing processor
> > queue-list Build a custom queue list
> > rmon Remote Monitoring
> > route-map Create route-map or enter route-map command
> >mode
> > router Enable a routing process
> > rtr RTR Base Configuration
> > scheduler Scheduler parameters
> > sdm Switch database management
> > service Modify use of network based services
> > shutdown Shutdown system elements
> > snmp-server Modify SNMP parameters
> > spanning-tree Spanning Tree Subsystem
> > subscriber-policy Subscriber policy
> > switchcore switchcore configuration
> > system Set the system configuration
> > tacacs-server Modify TACACS query parameters
> > template Select a template to configure
> > tftp-server Provide TFTP service for netload requests
> > time-range Define time range entries
> > udld Configure global UDLD setting
> > username Establish User Name Authentication
> > vlan Vlan commands
> > vmps VMPS settings
> > vtp Configure global VTP state
> >
> >###########################################################################
>#
> >
> >3550-EMI(config)#router ?
> > bgp Border Gateway Protocol (BGP)
> > egp Exterior Gateway Protocol (EGP)
> > eigrp Enhanced Interior Gateway Routing Protocol (EIGRP)
> > igrp Interior Gateway Routing Protocol (IGRP)
> > isis ISO IS-IS
> > iso-igrp IGRP for OSI networks
> > mobile Mobile routes
> > odr On Demand stub Routes
> > ospf Open Shortest Path First (OSPF)
> > rip Routing Information Protocol (RIP)
> > static Static routes
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:41 GMT-3