From: Frank Jimenez (franjime@xxxxxxxxx)
Date: Thu Jun 27 2002 - 12:39:56 GMT-3
Feature navigator www.cisco.com/go/fn says that FRF.8 has been supported
on MC3810s since 12.1.2(T) in the T train and 12.2.1 in mainline code.
Might want to get a case open with TAC to see if they know of specific
gotchas. Barring that, I might try 12.2(8)T4 - I've had lots of good
luck with that code on oddball problems....
Good Luck!
Frank Jimenez, CCIE #5738
franjime@cisco.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Wade Edwards
Sent: Thursday, June 27, 2002 9:53 AM
To: Ccielab (E-mail)
Subject: OT: FRF.8
Sorry for the off topic post but I am having problems getting FRF.8
(Frame-to-ATM) working on an MC3810.
I can get packets to be converted from ATM-to-Frame but the other
direction is not working. Has anyone else been able to get this working?
I know the problem is with the MC3810 because I get Frame traffic
inbound but I don't get any outbound traffic on the ATM interface.
I have tried another MC3810 and various IOS versions but no go.
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:42 GMT-3