From: Krucker, Louis (louis.krucker@xxxxxxxxxxx)
Date: Sun Jun 30 2002 - 13:20:14 GMT-3
Hello group
Heres my config:
The goal is to advertse one single route over e0 ( 172.31.0.0 / 16 )
This config dont works in my lab, all single routes are advertised over
e0, even if i disable split horizon.
Please correct me if i am wrong, may i dont get the point and i must use
another strategy.
int e0
ip address 172.17.5.1 255.255.255.0
ip summary-address rip 172.31.0.0 255.255.0.0
int loopback 1
ip address 172.31.2.1 255.255.255.0
int loopback 2
ip address 172.31.3.1 255.255.255.0
router rip
version 2
no auto-summary
network 172.17.0.0
network 172.31.0.0
Thanks
Louis
-----Original Message-----
From: GOLBERY Irhne
To: Krucker, Louis; 'ccielab@groupstudy.com'
Sent: 30.06.2002 17:56
Subject: RE: rip summary
My understanding
It is used in Network Access Server context and not for summarisation
like
we used to do in other routing protocol.
Example : 10 remote users connecting to a central router , in order not
to
have 10 hosts entry in the routing table of the central router you can
use
this command to summarize and only have a network or subnet entry in the
RIB
Correct me if i am wrong ?
Irene
-----Message d'origine-----
De : Krucker, Louis [mailto:louis.krucker@sunrise.net]
Envoyi : dimanche 30 juin 2002 17:13
@ : 'ccielab@groupstudy.com'
Objet : rip summary
Hi Group
I use rip v2 and no auto-summary, how the command ip rip summary-address
will work in this case. I did'nt found a detailed documentation in the
archive or at cco.
This command does not work in my lab, i try to advertise a summary
route.
Are there any hints ? Even if i disable split-horizon no summary is
advertised. If i look in the rip database the route is there.
Thanks for help
Louis
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:44 GMT-3