From: Luke (ccie@xxxxxxx)
Date: Sun Jul 07 2002 - 19:14:22 GMT-3
You need the PAW software before you can do anything. After you have the
software, Merge's troubleshooting page is quite useful. E-mail me offline
if you need the PAW software.
The cable you need is a straight through from emulator to router.
Luke
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
ccie candidate
Sent: Sunday, July 07, 2002 2:39 PM
To: ccie candidate; Robert Yee
Cc: ccielab@groupstudy.com
Subject: RE: OT : ISDN simulator Merge 2000A
i got the pin out of this cable from their site and i made the cable
manually ....still im not getting any reponse .
do i need to have special software for that or the hyper terminal is the one
?
also do you know what is the cable im supposed to use between the isdn S/T
port and the router port? is it straight Rj45 cable or something else ?
--On Sun, 7 Jul 2002 14:37:50 Robert Yee wrote: >You need a special cable in order to hook it up to your PC. You can get it from Merge (www.mergetech.com). I think it is about $17.00. They[re tech support is e-mail, but they are pretty helpful. > >Good luck. > >Robert > >-----Original Message----- >From: ccie candidate [mailto:ccie1@lycos.com] >Sent: Sunday, July 07, 2002 2:15 PM >To: ccielab@groupstudy.com >Subject: OT : ISDN simulator Merge 2000A > > > guys ; >i got used simulator Merge 2000 A from ebay ..the simulator has no keypad ..when i connect it to PC and use the hyper terminal i got no repsonse . >is there anything which i have to do to get this device work? >do i need to have the PAW software ..or what is the issue here. >if anyone has some experience with this device please post some hints . > > >Regards ; > >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:21 GMT-3