AUX port error

From: Ivan (limmt@xxxxxxxxxxxxx)
Date: Wed Jul 24 2002 - 01:13:24 GMT-3

• Next message: ntcaffeine@xxxxxxx: "September Lab Date Available & AZ CCIE LAB UPDATE"
• Previous message: Joe A: "RE: EIGRP tos k1 k2 k3 k4 k5"
• Next in thread: Hansang Bae: "Re: AUX port error"
• Maybe reply: Hansang Bae: "Re: AUX port error"
• Maybe reply: Nick Shah: "Re: AUX port error"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi,

I've configured the AUX port to simulate DDR between R1 and R2.
the DDR work fine between R1 and R2.
But when I start to ping the aux interface (dialer1) on R2 from
another router R3 (connected to R1), i cannot reach it.

Assuming all routing is in order
It gives me this error message on R1

:PPP-3-AUXFAST: Fast-switching to aux port, packet dropped

Need some advice.

Thanks
Ivan Lim

------------------------------------------------------------------------
cOntact @ Lycos <http://contact.lycosasia.com>
= 10MB for email and filestore + lots of other goodies...

• Next message: ntcaffeine@xxxxxxx: "September Lab Date Available & AZ CCIE LAB UPDATE"
• Previous message: Joe A: "RE: EIGRP tos k1 k2 k3 k4 k5"
• Next in thread: Hansang Bae: "Re: AUX port error"
• Maybe reply: Hansang Bae: "Re: AUX port error"
• Maybe reply: Nick Shah: "Re: AUX port error"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:41 GMT-3