From: Paglia, John (USPC.PCT.Hopewell) (JPaglia@xxxxxxxxxxxxx)
Date: Wed Jul 31 2002 - 00:11:32 GMT-3
I believe that's going to require the "auto-cost reference-bandwidth"
command. That's my knee-jerk answer...correct if wrong, humiliate as well if
you'd like!!!
Pags
> -----Original Message-----
> From: Jaspreet Bhatia [SMTP:jasbhati@cisco.com]
> Sent: Tuesday, July 30, 2002 10:42 PM
> To: ccielab@groupstudy.com
> Subject: Question about OSPF
>
> Folks,
> I have a question about OSPF . In one of the labs that I
> am doing he has asked the question configure the serial 0 interface of
> router R2 such that the OSPF cost of the interface accurately represents
> the actual speed of teh line
>
>
> and in teh solution he has give a bandwidth of 2000 and clockrate of
> 2000000. Can anyone help me understand this concept .Thanks
>
> Jaspreet
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:49 GMT-3