From: Peasah, Richard Kwame (rpeasah@xxxxxx)
Date: Tue Aug 06 2002 - 17:54:28 GMT-3
I've never used a Cat3550 but the way to define a VLAN on a Cat3524 for
instance as ff:
Test3501#vl dat
Test3501(vlan)#?
VLAN database editing buffer manipulation commands:
abort Exit mode without applying the changes
apply Apply current changes and bump revision number
exit Apply changes, bump revision number, and exit mode
no Negate a command or set its defaults
reset Abandon current changes and reread current database
show Show database information
vlan Add, delete, or modify values associated with a single VLAN
vtp Perform VTP administrative functions.
Test3501(vlan)#
-----Original Message-----
From: Javed Tufail [mailto:jtufail@cisco.com]
Sent: Tuesday, August 06, 2002 3:11 PM
To: Mike Schlenger; 'Todd Carswell'; ccielab@groupstudy.com
Subject: RE: Basic config of the cat 3550
No you have to be in config mode to define a vlan
3550_3#conf t
Enter configuration commands, one per line. End with CNTL/Z.
3550_3(config)#vlan ?
WORD ISL VLAN IDs 1-4094
access-map Create vlan access-map or enter vlan access-map command mode
dot1q dot1q parameters
filter Apply a VLAN Map
I am also still learning on this new box.
Javed
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Mike
Schlenger
Sent: Tuesday, August 06, 2002 12:45 PM
To: 'Todd Carswell'; ccielab@groupstudy.com
Subject: RE: Basic config of the cat 3550
Try the same command from privileged exec mode and NOT config mode. Ex:
cat3550#vlan 100
I don't have a 3550 to test, but that's the way its done on all other
3500's.
Mike
Michael Schlenger
CCIE #7079
N2N Solutions
mschlenger@n2nsolutions.com
847.592.3912
-----Original Message-----
From: Todd Carswell [mailto:acarswell@nc.rr.com]
Sent: Tuesday, August 06, 2002 2:28 PM
To: ccielab@groupstudy.com
Subject: Basic config of the cat 3550
All,
Allrighty, I've finally got my paws on a catalyst 3550. I've accessed
the software config guide for the 3550 on the Doc CD but things just
ain't quite right!
The Doc CD instructs the user to access the vlan-config mode by typing
in the following global config command...
vlan <vlan id>
Here's what I'm getting from the switch...
cat3550(config)# vlan 100 ?
Unrecognized Command
I'm definitely missing a step. Could someone point me in the right
direction? I'm hoping that CCO has a page that walks the user through
some basic setup configs for the cat3550.
Thanks for the help!
Todd Carswell
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:18 GMT-3