From: Wright, Jeremy (JA_WRIGHT@xxxxxxxxxxxx)
Date: Tue Aug 06 2002 - 22:35:57 GMT-3
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc5/scg/swt
rbl.htm#xtocid17
watch the wrap. follow the steps at the end of this link. when the switch
says its ready to receive the file, go to "transfer" at the top of the
hyperterm window..then click "send file" ..browse and find your image and
make sure you select the xmodem protocol. it takes a while for the image to
transfer..it took me an hour and a half.
-----Original Message-----
From: Rick Lowery
To: ccielab@groupstudy.com
Sent: 8/5/02 8:26 PM
Subject: still working with 3550 IOS (does anyone know how to use XMODEM
with hyperterminal?
Hello,
My switch is at the boot switch prompt, and I need to load the IOS back
on
with the XMODEM command. Could someone be so kind to help me?
Here are my command and the error from the 3550:
switch: copy xmodem:c3550-i5q3l2-mz.121-9.EA1c.bin
flash:c3550-i5q3l2-mz.121-9.EA1c.bin
Begin the Xmodem or Xmodem-1K transfer now...
CCCxmodem:c3550-i5q3l2-mz.121-9.EA1c.bin: I/O error
**I'm sending the file with the sendfile command from hyperterminal...
Thanks,
Rick
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:18 GMT-3