From: CCIE FUN (ccieexam2002@xxxxxxxxx)
Date: Wed Aug 07 2002 - 15:33:08 GMT-3
here are the answers to those questions
1. user IRDP
2. Can't remember the command on top of my head will
let you know later for the catalyst
3. username UNNAMED privilege 15
--- "Zhang, Ou (David)" <OuDavid.Zhang@gs.com> wrote:
> Hello,
>
> I'm totally stuck with the following questions from
> the CCIE Practical
> Studies vol. 1. I'd appreciate any answers, hints or
> suggestions. Thanks.
>
> p. 1167
> 9.2 Configure R3 so that workstations in Vlan 30 can
> dynamically locate
> their default gateway. They are not using DHCP. (R3
> hosts Vlan 30.)
>
> p. 1175
> 2.2 Configure the Catalyst so that if the backplane
> of the switch gets
> overloaded, the ports in VLAN 30 get serviced before
> those in VLAN 50. (The
> switch hosts these two vlans in question.)
>
>
> p. 1177
> 11.1 Configure R1 so that when the user unnamed logs
> into the router,
> that user immediately is put in enable mode.
>
> -David
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:19 GMT-3