From: kris.keen@xxxxxxxxxx
Date: Thu Aug 08 2002 - 22:10:24 GMT-3
Are you sure you configured your frame relay switch correctly? you may have
the wrong dlci setup on each interface on the switch
this has happened to me before..
-----------------------------------------------------------------
Kris Keen - CCNP, CCDP, CNE
Network Support Specialist - Network Systems
Aon Risk Services Australia Limited
(612) 9253 7272
0404862970
E: Kris.Keen@aon.com.au
syv
<syv@911networ To: ccielab@groupstudy.com
ks.com> cc:
Sent by: bcc:
nobody@groupst Subject: Wrong DLCI showing up on
DTEs
udy.com
09/08/2002
10:22 AM
Please respond
to syv
Hi ccielab,
when displaying the PVC on the DTE routers I get the wrong PVC.
Any suggestion?
Here is the config, and the show frame pvc.
C1751[S0/1]-----100-[S1]FR-SWITCH[S2]-101-----[S0]C2502
This is one of the most minimal config:
FR-Switch
frame-relay switching
interface Serial1
no ip address
encapsulation frame-relay
clockrate 56000
frame-relay intf-type dce
frame-relay route 100 interface Serial2 101
!
interface Serial2
no ip address
encapsulation frame-relay
clockrate 56000
frame-relay intf-type dce
frame-relay route 101 interface Serial1 100
!
c1720#sh fram pvc
PVC Statistics for interface Serial1 (Frame Relay DCE)
Active Inactive Deleted Static
Local 0 0 0 0
Switched 1 0 0 0
Unused 0 0 0 0
DLCI = 100, DLCI USAGE = SWITCHED, PVC STATUS = ACTIVE, INTERFACE = Serial1
input pkts 7 output pkts 6 in bytes 588
out bytes 554 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0 Num Pkts Switched
6
pvc create time 02:15:48, last time pvc status changed 02:12:09
PVC Statistics for interface Serial2 (Frame Relay DCE)
Active Inactive Deleted Static
Local 0 0 0 0
Switched 1 0 0 0
Unused 0 0 0 0
DLCI = 101, DLCI USAGE = SWITCHED, PVC STATUS = ACTIVE, INTERFACE = Serial2
input pkts 6 output pkts 6 in bytes 554
out bytes 554 dropped pkts 1 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0 Num Pkts Switched
6
pvc create time 02:15:00, last time pvc status changed 02:11:00
================================
DTE#1 should be DLCI 100 and NOT 101
hostname c1751
interface Serial0/1
ip address 192.168.10.1 255.255.255.0
encapsulation frame-relay
c1751#show frame pvc
PVC Statistics for interface Serial0/1 (Frame Relay DTE)
Active Inactive Deleted Static
Local 1 0 0 0
Switched 0 0 0 0
Unused 0 0 0 0
DLCI = 101, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/1
input pkts 6 output pkts 6 in bytes 554
out bytes 554 pkts dropped in 0
pkts dropped out 0 dropped bytes out 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 1 out bcast bytes 34
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 02:14:17, last time pvc status changed 02:12:47
================================
DTE# 2 should be DLCI 101 and NOT 100
hostname c2502
interface Serial0
ip address 192.168.10.3 255.255.255.0
encapsulation frame-relay
c2502#sh fram pvc
PVC Statistics for interface Serial0 (Frame Relay DTE)
Active Inactive Deleted Static
Local 1 0 0 0
Switched 0 0 0 0
Unused 0 0 0 0
DLCI = 100, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0
input pkts 6 output pkts 6 in bytes 554
out bytes 554 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 1 out bcast bytes 34
pvc create time 02:14:31, last time pvc status changed 02:14:31
c2502#
Thanks
---- syv@911networks.com
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:21 GMT-3