From: Tom Young (gitsyoung@xxxxxxxxxxx)
Date: Thu Aug 15 2002 - 05:55:26 GMT-3
I couldn't find the dialer-map or routing protocol in your
configuration, Because it couldn't know the remote
office's address so it won't take the dial-up.
--- Semion Lisyansky <semionl@yahoo.com> $B$+$i$N%a%C%;!<(B
$B%8!'(B
> Hi List,
>
> I'm triying to configure ISDN callback on
> a single ISDN line connected to two routers.
> It looks like the authentication passes OK,
> but then nothing happened - no call back.
> My configs:
>
> Calling party:
> !
> hostname 2504-1
> !
> username 2503-2 password 0 cisco
> !
> interface BRI0
> no ip address
> encapsulation ppp
> no keepalive
> dialer pool-member 1
> isdn switch-type basic-net3
> isdn answer1 XXXX
> isdn answer2 XXXX
> cdapi buffers regular 0
> cdapi buffers raw 0
> cdapi buffers large 0
> no cdp enable
> ppp callback request
> ppp authentication pap
> !
> interface Dialer1
> ip address 192.168.120.21 255.255.255.248
> encapsulation ppp
> no keepalive
> dialer pool 1
> dialer idle-timeout 50
> dialer string YYYY
> dialer-group 1
> pulse-time 0
> ppp callback request
> ppp authentication pap
> ppp pap sent-username 2504-1 password 7
> 00071A150754
> !
> dialer-list 1 protocol ip permit
> !
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:25 GMT-3