From: Ahmed Al-Ghawas (ghawas@xxxxxxxxxxxxxx)
Date: Fri Aug 23 2002 - 14:05:58 GMT-3
Are they loopback networks? if they are you can get rid of them by adding
the "ip ospf network point-to-point" under each loopback interface that is
contributing in the routing process.
HTH
Ahmed
----- Original Message -----
From: "ccie candidate" <ccie1@lycos.com>
To: <ccielab@groupstudy.com>
Sent: Friday, August 23, 2002 7:49 PM
Subject: ospf over frame /32 route
> folks
> when i was doing ospf over frame ..i had the hub as multipoint .
>
> i noticed that /32 routes of the spokes are installed in the routing table
..is this normal ...is there anyway to get rid of it .
>
> im already using ip ospf network point-to-multipoint on the interfaces .
>
>
> thanks
>
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:35 GMT-3