Re: SNMP error message

From: Mingzhou Nie (mnie@xxxxxxxxx)
Date: Tue Aug 27 2002 - 19:47:00 GMT-3

• Next message: Mingzhou Nie: "RE: Again BGP sync/rid problem"
• Previous message: CCIE: "Re: NTP server/peer"
• Maybe in reply to: Vincent Lee: "SNMP error message"
• Next in thread: Vincent Lee: "Re: SNMP error message"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Vincent,

This error message basically says that ip couldn't open udp port 161.
It can be caused by

- you enabled "snmp-server community " but no interface has ip
configured,
- the router is running low memory.

ming
--- Vincent Lee <mcne95@yahoo.com> wrote:
> Hi, All
>
> How can I disable the snmp error messages?
> I have 12.2 IOS.
>
> thank you
>
> Router1#
> %IP_SNMP-3-SOCKET: can't open UDP socket
> Unable to open socket on port 161
> %IP_SNMP-3-SOCKET: can't open UDP socket
> Unable to open socket on port 161
> %IP_SNMP-3-SOCKET: can't open UDP socket
> Unable to open socket on port 161
> %IP_SNMP-3-SOCKET: can't open UDP socket
> Unable to open socket on port 161
>
>
>

• Next message: Mingzhou Nie: "RE: Again BGP sync/rid problem"
• Previous message: CCIE: "Re: NTP server/peer"
• Maybe in reply to: Vincent Lee: "SNMP error message"
• Next in thread: Vincent Lee: "Re: SNMP error message"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:39 GMT-3