From: Chris Butler (butlerc@xxxxxxxxxxxxxx)
Date: Thu Aug 29 2002 - 02:56:18 GMT-3
We have two OC3 in our network, and we have done something similar with
72o6 series routers back to back. We had trouble with QOS. We could not
get pvc bundles to work properly on Cat 6k, so we tested on 7200.
PVC Bundles never did work on 6k/Flexwan, so we used LLQ instead.
Good luck,
Chris
I have to mock a network design for a customer that will have Dual OC3
> circuits connecting two sites.
>
> I didn't think it would be a problem to run them back-to-back to mock
> the connections but being that I haven't done it
> before I thought to throw it out there.
>
> Is there anything sticking about just connecting OC3 interfaces
> back-to-back in a test design?
>
> Scott
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:41 GMT-3