From: Dang Quang Minh (minhdq@xxxxxxxxxxxxx)
Date: Sat Aug 31 2002 - 04:19:00 GMT-3
Hello
So, in this case, we will use
interface FastEthernet3/0.598
rate-limit output 1000000 187500 375000 conform-action transmit exceed drop
Minh
At 01:06 AM 8/29/2002 -0500, Chris Butler wrote:
>This will explain things quite nicely...
>
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/qos_c/q
cpart4/qcpolts.htm#xtocid241932
>Good luck,
>
>Chris
> > Hello,
> >
> > I have a Cisco 2621 and I want to limit the line speed on one of the
> > FastEthernet sub-interface to 1MBit / sec. I found a command regarding
> > CAR on CCO:-
> >
> > interface FastEthernet3/0.598
> > rate-limit input <bps> <burst-normal> <burst-max> conform-action
> > transmit exceed-action drop
> > rate-limit output <bps> <burst-normal> <burst-max> conform-action
> > transmit exceed-action drop
> > But I am confused on what values do I have to put into <bps>
> > <burst-normal> <burst-max> to get it down to 1MB...
> > Also, is this the only line that I need to configure CAR?
> >
> > N.B:- I'm using IOS Version 12.0(7)T2
> > Thanks so much for your help in advance,
> > Best Regards,
> > H.
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:43 GMT-3