From: Volkov, Dmitry (Toronto - BCE) (dmitry_volkov@ca.ml.com)
Date: Wed Sep 04 2002 - 08:52:32 GMT-3
Hello,
Since R2 is not ABR but ASBR we can not use area range command.
I case if You are doing redistr between OSPF and IGRP You can just put
"summary-address 172.16.0.0 255.255.255.0" under OSPF process on R2
It will create automatically route to Null
This route will be propagated into IGRP.
You can also just put secondary address (like 172.16.0.1/24) on R2 interface
faced to R1
Dmitry
> -----Original Message-----
> From: elping [mailto:elpingu@acedsl.com]
> Sent: Tuesday, September 03, 2002 12:37 AM
> To: frank.yu@japan.bnpparibas.com
> Cc: ccielab@groupstudy.com
> Subject: Re: redistribute ospf to igrp again
>
>
> do an area range command for the /30
>
> frank.yu@japan.bnpparibas.com wrote:
>
> > Group,
> >
> > As you can see the following diagram, R2 is ospf
> ASBR and running
> > igrp too.
> > My question is how can R3 reach ospf area0, except
> R2 advertising a
> > default route to igrp?
> > Is there a way for R2 to summary the ospf backbone
> into 24bit route
> > and redistribute it to igrp domain?
> > Thanks!
> >
> > 172.16.0.0/30 172.16.1.0/24
> > R1-------------------R2--------------------R3
> > ospf area0 igrp
> >
> > Frank
> >
> > This message and any attachments (the "message") is
> > intended solely for the addressees and is confidential.
> > If you receive this message in error, please delete it and
> > immediately notify the sender. Any use not in accord with
> > its purpose, any dissemination or disclosure, either whole
> > or partial, is prohibited except formal approval. The internet
> > can not guarantee the integrity of this message.
> > BNP PARIBAS (and its subsidiaries) shall (will) not
> > therefore be liable for the message if modified.
> >
> > ---------------------------------------------
> >
> > Ce message et toutes les pieces jointes (ci-apres le
> > "message") sont etablis a l'intention exclusive de ses
> > destinataires et sont confidentiels. Si vous recevez ce
> > message par erreur, merci de le detruire et d'en avertir
> > immediatement l'expediteur. Toute utilisation de ce
> > message non conforme a sa destination, toute diffusion
> > ou toute publication, totale ou partielle, est interdite, sauf
> > autorisation expresse. L'internet ne permettant pas
> > d'assurer l'integrite de ce message, BNP PARIBAS (et ses
> > filiales) decline(nt) toute responsabilite au titre de ce
> > message, dans l'hypothese ou il aurait ete modifie.
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:43 GMT-3