From: Carlos G Mendioroz (tron@huapi.ba.ar)
Date: Sun Sep 08 2002 - 09:22:13 GMT-3
I believe that Tc should comply with 10ms <= Tc <= 1s
(It is documented somewhere)
If your setting of CIR and Bc yields something outside this range,
then it will stay at the limit. Easy to check...
Nick Shah wrote:
>
> Joe
>
> Check out putting a lower Bc, I agree that you cannot increase the value of
> Tc from 125ms, but you certainly can decrease it.
>
> rgds
> Nick
> ----- Original Message -----
> From: Joe A <groupstudy@comcast.net>
> To: 'chenyan' <chenyan@deeptht.com.cn>; 'ccielab' <ccielab@groupstudy.com>
> Sent: Saturday, September 07, 2002 1:25 AM
> Subject: RE: how to change the TC of Traffic Shaping?
>
> > I may be wrong, but I don't think you can. I believe the 'c' in Tc
> > stands for 'constant'.
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > chenyan
> > Sent: Friday, September 06, 2002 2:47 AM
> > To: ccielab
> > Subject: how to change the TC of Traffic Shaping?
> >
> >
> > like the subject
> >
> > thanks
-- Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:46 GMT-3