Bridging over frame-relay with hub and spoke topology

From: Guoqi Cui (guoqicui@yahoo.com)
Date: Tue Sep 10 2002 - 22:14:26 GMT-3

• Next message: Angelo De Guzman: "OSPF and NBMA"
• Previous message: Nick Shah: "Re: Re: Ipx Wan Help please"
• Next in thread: Volkov, Dmitry (Toronto - BCE): "RE: Bridging over frame-relay with hub and spoke topology"
• Maybe reply: Volkov, Dmitry (Toronto - BCE): "RE: Bridging over frame-relay with hub and spoke topology"
• Maybe reply: Mingzhou Nie: "Re: Bridging over frame-relay with hub and spoke topology"
• Maybe reply: Brian Dennis: "RE: Bridging over frame-relay with hub and spoke topology"
• Maybe reply: Volkov, Dmitry (Toronto - BCE): "RE: Bridging over frame-relay with hub and spoke topology"
• Maybe reply: Brian Dennis: "RE: Bridging over frame-relay with hub and spoke topology"
• Maybe reply: Omer Ansari: "RE: Bridging over frame-relay with hub and spoke topology"
• Maybe reply: Brian Dennis: "RE: Bridging over frame-relay with hub and spoke topology"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi, group:

I am trying to configure bridging over frame-relay
with hub and spoke topology. Somehow, the two spokes
can ping the hub, but the two spokes can not ping each
other. Is this the correct operation or I missed
something?

Thank you.

Guoqi

R3 is the hub

R1, R4 are spokes in frame-relay. each of the has
ethernet connection to three other routers acting as
hosts.

R3:
interface Serial0/1
 no ip address
 encapsulation frame-relay
 frame-relay map bridge 301 broadcast
 frame-relay map bridge 304 broadcast
 
R1:
interface Serial0/1
no ip address
encapsulation frame-relay
frame-relay map bridge 103 broadcast

R4:
 interface Serial0/1
 no ip address
 encapsulation frame-relay
 clock rate 64000
 frame-relay map bridge 403 broadcast

• Next message: Angelo De Guzman: "OSPF and NBMA"
• Previous message: Nick Shah: "Re: Re: Ipx Wan Help please"
• Next in thread: Volkov, Dmitry (Toronto - BCE): "RE: Bridging over frame-relay with hub and spoke topology"
• Maybe reply: Volkov, Dmitry (Toronto - BCE): "RE: Bridging over frame-relay with hub and spoke topology"
• Maybe reply: Mingzhou Nie: "Re: Bridging over frame-relay with hub and spoke topology"
• Maybe reply: Brian Dennis: "RE: Bridging over frame-relay with hub and spoke topology"
• Maybe reply: Volkov, Dmitry (Toronto - BCE): "RE: Bridging over frame-relay with hub and spoke topology"
• Maybe reply: Brian Dennis: "RE: Bridging over frame-relay with hub and spoke topology"
• Maybe reply: Omer Ansari: "RE: Bridging over frame-relay with hub and spoke topology"
• Maybe reply: Brian Dennis: "RE: Bridging over frame-relay with hub and spoke topology"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:48 GMT-3