From: MADMAN (dave@interprise.com)
Date: Wed Sep 11 2002 - 17:52:24 GMT-3
vlan 20 in your example is just a shortcut to creating a VLAN without
entering the non-intuitive (cause I always forget:) "vlan database".
"Interfave vlan 20" command creates the logical interface 54 on the
switch but it does NOT enter the VLAN into the VLAN database.
Dave
Eyad Bajes wrote:
>
> Group, Can somebody explain to me the difference between these 3
> different /or same vlan configuration modes.. Switch# vlan database
> ,
> Switch# configure terminal
>
> Switch(config)# vlan 20
> and Switch(config)# interface vlan 20switch(config-vlan)#
> I know this can be simple, but I'm confusing my self the more i read
> about it.Thanks,
>
> ------------------------------------------------------------------------
>
> MSN Photos is the easiest way to share and print your photos: Click Here
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"You don't make the poor richer by making the rich poorer." --Winston Churchill
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:49 GMT-3