From: certstudy (certstudy@snet.net)
Date: Thu Sep 12 2002 - 19:05:10 GMT-3
I have a 5505 with supIII cards in my lab. i wont be back in the office
until Monday but if you want, I can swap flash cards with you. I can send
you a flash card with a valid image on it and you can send me your blank
one. or you can drive down if you want probably about 2 hours or so to
Bridgeport, CT.
Dennis
----- Original Message -----
From: "Cisco Kid" <cisco@certifiednets.com>
To: <ccielab@groupstudy.com>
Cc: <cisco@groupstudy.com>
Sent: Wednesday, September 11, 2002 1:48 PM
Subject: Help Needed to recover 5500 with bad software in New England
> ** High Priority **
>
>
>
> I have a Catalyst 5500 with a sup III for my home lab. Some how the
software
> became corrupted. It now only boots into rommon. The two versions of
software
> in the boot flash don't work. I have Rommon ver 3.2 so no I can't x-modem
or
> tftp. The only way to recovery is to be able to copy the OS on to a flash
card
> I bought. I have the software. Is there any one that can help me? I can
use
> any of the routers or switches listed below. It will only take 5 minutes
to do
> this. I am unemployed so I cant afford to buy another supervisor. I live
in
> Providence, RI and I will pretty much travel to get this fixed.
>
> Thanks,
>
> Robert Hosford
>
> p.s. please reply to rhosford@certifiednets.com
>
>
> Filesystem Class "C"AS5800 Dial Shelf Controller Catalyst 5000/5500
> Supervisor III Module Catalyst 6000/6500 Supervisor Engine I Catalyst
> 6000/6500 Supervisor Engine II Cisco 7000 Route Processor Cisco 7100
Series
> Routers Cisco uBR7100 Series Routers Cisco 7200 Series Network
Processing
> Engine Cisco uBR7200 Series Routers Cisco 7200VXR Series Network
Services
> Engine 1 Cisco 7600 Series Internet Routers Cisco 10000 Series Routers
(ESR)
> Cisco uBR10000 Series Routers
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:50 GMT-3