From: Brian Dennis (brian@5g.net)
Date: Fri Sep 13 2002 - 01:41:31 GMT-3
Correct. With Ethernet the router has a layer 3 to layer 2 mapping so
there isn't an issue.
Chief_Wiggum>sho arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet 172.16.1.1 - 0001.9663.96c1 ARPA Ethernet0/1
Chief_Wiggum>
Brian Dennis, CCIE #2210 (R&S/ISP Dial)
-----Original Message-----
From: Ciscomonkey@aol.com [mailto:Ciscomonkey@aol.com]
Sent: Thursday, September 12, 2002 9:18 PM
To: brian@5g.net; BIGB97750@aol.com; ccielab@groupstudy.com
Subject: Re: ISDN question
He probably is comparing it to his ethernet interface whereas he can
ping the
ethernet interface once it has an IP address and is in the NO SHUT
state, but
can't do the same with the BRI interface. Is that correct?
JJ
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:50 GMT-3