From: ping pong (pong964815@hotmail.com)
Date: Sun Sep 15 2002 - 23:36:21 GMT-3
I'm having a problem configuring pim-sparse mode.
My layout is r1 connected to r2 ; r2 connected to r3 and r4 on a multipoint
frame relay link. ON all the connections i enabled pim-sparse mode. on one
of r2's ethernet links I did a igmp join group to like 224.224.224.224. The
pim rp-address in on r3.
The problem is that none of the routers see the 224.224.224.224 multicast
route. ON r3 I repeatedly get invalid join message about r2.
ANy ideas on what i could be doing wrong? Or what that error message means?
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:53 GMT-3