From: Volkov, Dmitry (Toronto - BCE) (dmitry_volkov@ca.ml.com)
Date: Mon Sep 16 2002 - 12:23:12 GMT-3
> -----Original Message-----
> From: Volkov, Dmitry (Toronto - BCE)
> Sent: Monday, September 16, 2002 11:21 AM
> To: 'Jayashanker Warrier'; Ajit
> Cc: ccielab@groupstudy.com
> Subject: RE: OSPF : Type-7 to Type-5 block !!
>
>
> You can use "not-advertise" option in "summary-address"
> command on NSSA ABR or NSSA ASBR
> It will prevent LSA 7 to be traslated to LSA 7
Sorry - "It will prevent LSA 7 to be traslated to LSA 5" :o)
>
> Dmitry
>
>
> > -----Original Message-----
> > From: Jayashanker Warrier [mailto:jwarrier@rediffmail.com]
> > Sent: Monday, September 16, 2002 9:33 AM
> > To: Ajit
> > Cc: ccielab@groupstudy.com
> > Subject: Re: OSPF : Type-7 to Type-5 block !!
> >
> >
> > Hi Ajit,
> >
> > I hope summary-address will do for you. This to be configured in
> > the NSSA ABR. The P bit is always set (set to 1)(the routes will
> > be translated) and there is no option to set to 0 at the ASBR
> > (NSSA) so that only some routes are leaked into OSPF by ABR
> >
> > Thaks
> >
> > Jayashanker
> >
> >
> >
> > t 18:18 16/09/2002 +0530, Ajit wrote:
> > How does one set the P bit to 0,(in the hello pkts) in an NSSA
> > area, such that
> > the redistributed routes into the NSSA area (Type-7 ) stay only
> > within that
> > area and do not get converted to Type-5 when it hits the ABR of
> > that NSSA
> > area.
> >
> > What needs to be set on the NSSA ASBR router thats doing the
> > residtribution
> > !!
> >
> > Thanks....
> >
> > __________________________________________________________
> > Give your Company an email address like
> > ravi @ ravi-exports.com. Sign up for Rediffmail Pro today!
> > Know more. http://www.rediffmailpro.com/signup/
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:53 GMT-3