From: Song Mu (songmu@yahoo.com)
Date: Mon Sep 16 2002 - 21:41:49 GMT-3
Thanks, Nick:
I also have another question about the SVC config. I found some example
config has the ilmi signaling specified, such as pvc 0/16 ilmi, but not
the other, such as the example in CCO, only has pvc 0/5 qsaal
configured. I belive both are correct. Which way should we do in the
LAB enviorment.
Thanks,
Song
--- Nick Shah <nshah@connect.com.au> wrote:
> Song
>
> SVC requires 'switching' & 'signalling' so you cannot do it back to
> back.
> You will need a LS1010 to do it for you
>
> PVC doesnt require this, so you can specify a clock source on one end
> and do
> it (clock source internal)
>
> rgds
> Nick
> ----- Original Message -----
> From: "Song Mu" <songmu@yahoo.com>
> To: <ccielab@groupstudy.com>
> Sent: Monday, September 16, 2002 1:56 PM
> Subject: ATM back to Back SVC configuration ?
>
>
> > Hi,
> >
> > Does the ATM SVC can be configured using ATM back to back
> connection?
> > If yes, could any one provide a config example using ATM back to
> back
> > connection?
> >
> > Thanks,
> >
> > Song
> >
> >
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! News - Today's headlines
> > http://news.yahoo.com
> >
>
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:54 GMT-3