From: Erick B. (erickbe@yahoo.com)
Date: Wed Sep 18 2002 - 01:51:09 GMT-3
Hint: Eye Are Bee
--- Peng Zheng <zpnist@yahoo.com> wrote:
> Config:
>
> R1(FE 0/0)--(FE 0/1)CAT3550(FE 0/3)--(FE 0/0)R3
> |(FE 0/2)
> R2(FE 0/0)-------------
>
> FE 0/0 of R1 with ip 10.10.10.1/24 on VLAN1
> FE 0/0 of R2 with ip 10.10.20.1/24 on VLAN2
>
> FE 0/0 on R3 and FE 0/3 on CAT 3550 has been
> configured as trunk.
>
> VLAN3 is configured on CAT3550 with administration
> address 10.10.20.2/24
>
> Requirement:
>
> 1) Configure R3 to bridge VLAN2 and VLAN3.
>
> 2) Configure R3 so that VLAN1 need to routed with
> VLAN2 and VLAN3.
>
> IP on R3 is 10.10.20.3 to bridge VLAN2 and VLAN3.
>
> CAT3550 has set up 10.10.20.3 as default gateway.
>
>
> I can't figure it out.
>
>
>
> Thank you for help.
>
> Best Wishes,
> Peng Zheng
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:55 GMT-3