From: Zeb Khan (zeb.khan@environment-agency.gov.uk)
Date: Wed Sep 18 2002 - 04:29:38 GMT-3
You can have separate windows for connection to each router. You can set the enable password if you like (provided they have not denied this). If Ctrl+Shift+6 is a pain, try configuring escape-char 3 on the line interfaces, then it is only ctrl+c, it make breaking into pings and traces easier.
Zeb ;-)
>>> "Kevin Tang" <Kevin.Tang@telecom.co.nz> 09/17/02 09:40pm >>>
Can I set the enable password for each router? because I like to telnet from router to router instead of Ctrl+Shift+6 then x back to terminal server.
-
----Original Message-----
From: CCIE FUN [mailto:ccieexam2002@yahoo.com]
Sent: Tuesday, 17 September 2002 02:31
To: KHAN, IFTIKHAR A; 'ccielab@groupstudy.com'
Subject: Re: Question about LAB
they provide the IP addressing. you don't even have to
configure the interfaces for the IP's.
I had to only configure the ISDN and ATM interface
Ip's
otherwise everything is preconfigured.
the diagram is included with all the info.
--- "KHAN, IFTIKHAR A" <IKHAN@scana.com> wrote:
> Do they also provide IP addresses in actual ccie lab
> scenario or you have to
> figure out and assign Ip addresses by your self for
> the lab ????
>
> Thanks
>
>
> > Iftikhar Khan
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:55 GMT-3