From: Colin Barber (Colin.Barber@telewest.co.uk)
Date: Wed Sep 18 2002 - 13:16:14 GMT-3
If you don't have a TFTP configured then use the internal flash of the
router.
copy your basic config to flash 'copy running flash:basic'
Config your lab and save to flash 'copy run flash:lab'
If you ever overwrite the basic config from startup then copy it back 'copy
flash:basic startup'
When you want to load the lab config, boot the router and then 'copy
flash:lab running'
Or you can use the 'boot config flash:lab' config command and reload.
Colin
-----Original Message-----
From: Jennifer Bellucci [mailto:jennifer_bellucci@hotmail.com]
Sent: 16 September 1998 06:08
To: ccielab@groupstudy.com
Subject: Saving Config files?
Hi,
I am working through some labs at the moment. Can you please tell me how to
save the configs so that when I reboot the machine it is pre-configured like
usual and if I want to continue my lab I can load the file.
I am sure this has been covered before, but I would really appreciate your
help. Any other tips or tricks would be nice.
PS: I know my date is wrong...this will be fixed as soon as I find my
sister,
sorry.
------------------------------------------------------------------------------
Live Life in Broadband
www.telewest.co.uk
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material.
Statements and opinions expressed in this e-mail may not represent those of the company. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender immediately and delete the material from any computer.
==============================================================================
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:55 GMT-3