From: Prakash H Somani (pdsccie@rediffmail.com)
Date: Wed Sep 18 2002 - 13:30:20 GMT-3
Hi,
I think I can agree with you partially. R2 will dial i.e BRI will
come in spoofing mode from standby if R3 e0 goes down only if
those two routers are directly connected. If those are connected
through switch...then it will not work....
Regards....Prakash
On Wed, 18 Sep 2002 Peng Zheng wrote :
>Hi,
>
>R1(bri 0)-----(bri 0)R2(e0)---(e0)R3
> (e1)|________________________|(e1)
>
>IGRP is run on all three routers.
>
>Requirement:
>
>1) R2 only dials R1 when the e0 to R3 is disconnected.
>2) Snapshot and dialer watch can not be used.
>
>
>I think I should use backup interface under e0 of R2.
>
>Is it right?
>
>If so, How should I configure the dialer-list?
>
>And because two numbers are used. R2 need to dial
>second if it can not connect to R1.
>
>if:
>
>dialer map ip 1.1.1.1 name r1 broadcast number1
>dialer map ip 1.1.1.1 name r1 broadcast number2
>
>is OK?
>
>
>Thank you for help.
>
>Best Wishes,
>Peng Zheng
>
>
>
>__________________________________________________
>Do you Yahoo!?
>Yahoo! News - Today's headlines
>http://news.yahoo.com
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:55 GMT-3