From: Casey, Paul (6822) (Paul.Casey@o2.com)
Date: Wed Sep 18 2002 - 21:08:21 GMT-3
Why does putting that command under the interfaces change it to a /24 is
there any other use for that command on a loopback interfaces appart from
doing that..
Or when else might you need to use that command on a loopback interface...
Any help appreciated
Kind regards..
Paul..
--------------------------
Sent from my BlackBerry Wireless Handheld
-----Original Message-----
From: Chris Larson <clarson52@comcast.net>
To: Justin Cook <Justin.Cook@computerland.co.nz>; ccielab@groupstudy.com
<ccielab@groupstudy.com>
Sent: Wed Sep 18 23:07:56 2002
Subject: Re: OSPF summary on a Loopback
Under the loopback interface add the ip ospf network point-to-point command
----- Original Message -----
From: "Justin Cook" <Justin.Cook@computerland.co.nz>
To: <ccielab@groupstudy.com>
Sent: Wednesday, September 18, 2002 5:04 PM
Subject: OSPF summary on a Loopback
> Question is to summarise a 30 address on a loopback to a 24 address. The
> loopback is in Area 30 and summarizing to backbone
>
> I used the summary-address 172.16.20.0 255.255.255.0
>
> But other OSPF routers not taking the summary
>
> Anything I am missing
>
> Thanks
>
>
> --
> Justin Cook
****************************************************************************************
This E-mail is from O2. The E-mail and any files
transmitted with it are confidential and may also be privileged and intended
solely for the use of the individual or entity to whom they are addressed.
Any unauthorised direct or indirect dissemination, distribution or copying
of this message and any attachments is strictly prohibited. If you have
received the E-mail in error please notify postmaster@O2.com or
telephone ++ 353 1 6095000.
*****************************************************************************************
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:56 GMT-3