From: Casey, Paul (6822) (Paul.Casey@o2.com)
Date: Thu Sep 19 2002 - 21:00:55 GMT-3
I am trying to complete the following.
I have 2 E1 links on a 2651 router in a remote site and I am going to bring
the back into a central site with a channelised STM1 on a 7200.
Series router.
Nothing major here except the network is entirely bridged. ie.. Everything
is in one bridge group and it has to remain this way..
Don't ask me why.. (long story)
So I assume, and I am only guessing here when this goes active. One of these
links will get shut down automatically to prevent loops.
What I would like to do it load balance over these links.
Can I configure ppp multilink on the 2 bridged e1 links and load balance..
Over both links.
Any help appreciated.
Kind regards.
Paul.
--------------------------
Sent from my BlackBerry Wireless Handheld
****************************************************************************************
This E-mail is from O2. The E-mail and any files
transmitted with it are confidential and may also be privileged and intended
solely for the use of the individual or entity to whom they are addressed.
Any unauthorised direct or indirect dissemination, distribution or copying
of this message and any attachments is strictly prohibited. If you have
received the E-mail in error please notify postmaster@O2.com or
telephone ++ 353 1 6095000.
*****************************************************************************************
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:57 GMT-3