From: Donny MATEO (donny.mateo@sg.ca-indosuez.com)
Date: Fri Sep 20 2002 - 04:54:11 GMT-3
happened once to me. Removed every config (dialer, and async interface). Reboot the router. Put back
the config, and it works.
Another thing since you can only call from one side, when you want to change the "modem dialin" to
"modem host" in one of the router, I need to reboot to make it work as well... go figure
Donny
"kpalmer"
<kip.palmer@veriz To: <ccielab@groupstudy.com>
on.net> cc:
Sent by: Subject: OSPF Demand-C Resolved/Take Note!
nobody@groupstudy
.com
20-09-2002 13:38
Please respond to
"kpalmer"
I'm very RELIEVED!!! (Like you care)
My OSPF Demand circuit DILEMMA IS OVER!
In previous posts, I threatened suicide and/or throwing in the towel
over OSPF Demand-C "over Aux-to-Aux", failure to be quite.
I'm not talking about a redistributed route keeping it up. I'm talking
about
*Change in LSA 0.0.0.0*...?, in the following topology:
A0 A0
r1----------r2
\ /
\ -|--|- /
DDR
A10 Stub <or> A0 V-Link
*IT DOESN'T GET ANY MORE BASIC*
I just lab'd it on a ISDN Sim and the circuit is quiet like a baby. It
actually works. So, the problemo is somewhere in my Async config and
I really don't care to resolve it. Reasoning, not tested on, and not a
real
world resolution.
SO FOR THOSE CURRENTLY WITH A ROPE AROUND YOUR NECK, GET DOWN!!
I'll include my, Interface Async config's for anyone who care's to
resolve the aux-to-aux, PPP debacle. E.I., *Change in LSA 0.0.0.0*
Late,
KPALMER....
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hostname r6 === CALLED Router
chat-script dummy " "
username r1_net password (^*(^U^*&(*
interface Async1
bandwidth 64
ip address 170.100.16.6 255.255.255.240
encapsulation ppp
async default routing
async dynamic routing
async mode dedicated
ip ospf cost 9999
ip ospf demand-circuit
no peer neighbor-route
dialer in-band
dialer idle-timeout 60
dialer map ip 170.100.16.1 name r1_net broadcast
dialer-group 1
ppp authen chap
router ospf 6
router-id 170.100.9.9
network 170.100.16.0 0.0.0.15 area 10
area 10 stub no-summary
dialer-list 1 protocol ip permit
dialer-list 1 protocol ipx permit
line aux 0
exec-timeout 0 0
script dialer dummy
modem Dialin
transport input all
flowcontrol hardware
This message is for information purposes only and its content
should not be construed as an offer, or solicitation of an offer,
to buy or sell any banking or financial instruments or services
and no representation or warranty is given in respect of its
accuracy, completeness or fairness. The material is subject
to change without notice. You should take your own independent
tax, legal and other professional advice in respect of the content
of this message. This message may contain confidential or
legally privileged material and may not be copied, redistributed
or published (in whole or in part) without our prior written consent.
This email may have been intercepted, partially destroyed,
arrive late, incomplete or contain viruses and no liability is
accepted by any member of the Credit Agricole Indosuez group
as a result. If you are not the intended recipient of this message,
please immediately notify the sender and delete this message
from your computer.
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:57 GMT-3