From: steven.j.nelson@bt.com
Date: Fri Sep 20 2002 - 12:39:44 GMT-3
Chris
I think svy is being a bit naieve if he thinks Cisco will simply let you use
CDP and such simple tools in a lab environment.
Anyway stick to the subs it works...
Steve
CCIE#10055
-----Original Message-----
From: Larson, Chris [mailto:CLarson@usaid.gov]
Sent: 20 September 2002 16:36
To: 'syv'; Nelson,SJ,Steven,IVNH33 C
Cc: ccielab@groupstudy.com
Subject: RE: Re[2]: IPX network discovery
Not necessarily true. This does not show everything you need. If you are
connected to a switch I do not believe it will give you the IPX network info
of the neighboring router. Even if it does, it is possible to turn it off on
the router so you cannot get the info. ......
The way described previously with the sub ints and encapsulations will
definetly work. I do not think Cisco will make it as easy as show cdp
neighbor even if it will show you the IPX network.
-----Original Message-----
From: syv [SMTP:syv@911networks.com]
Sent: Friday, September 20, 2002 10:50 AM
To: steven.j.nelson@bt.com
Cc: ccielab@groupstudy.com
Subject: Re[2]: IPX network discovery
On Friday, September 20, 2002, steven.j.nelson@bt.com wrote:
The simplest is:
show cdp neighbor
and everything is there.
-----Original Message-----
sjnbc> Pieter
sjnbc> Create some subinterfaces off the main interface the the ipx
device you want
sjnbc> to discover is hanging off.
sjnbc> Make sure each sub interface has a different IPX address and
encapsulation
sjnbc> type, also check that the main interface has IPX route-caching
disabled.
sjnbc> Debug ipx packet, and you will see an error message from the
interface with
sjnbc> the correct encapsulation but the incorrect address, the correct
address
sjnbc> will be in the debug. Voila' you have found the network and encaps.
sjnbc> Now remove the subs and put the correct details onto the main
interface and
sjnbc> you should be working.
sjnbc> Thanks
sjnbc> Steve
sjnbc> CCIE #10055
sjnbc> -----Original Message-----
sjnbc> From: Pieter Jordaan [ mailto:pieterj@is.co.za
<mailto:pieterj@is.co.za> ]
sjnbc> Sent: 20 September 2002 10:22
sjnbc> To: ccielab@groupstudy.com
sjnbc> Subject: IPX network discovery
sjnbc> Hi
sjnbc> My understanding is that nhrp will help me in discovering
what the IPX
sjnbc> network number on a wan link is, Is it possible to discover IPX
networks on
sjnbc> Ethernet in a similar manner to the way NHRP works, or how would I go
about
sjnbc> doing this.
sjnbc> Thanks
sjnbc> Pieter Jordaan
sjnbc> Hosting Engineer
sjnbc> Tel: 27115750313
sjnbc> Email: pieterj@is.co.za < mailto:pieterj@is.co.za
<mailto:pieterj@is.co.za> >
sjnbc> Web: http://www.is.co.za <http://www.is.co.za> <
http://www.is.co.za <http://www.is.co.za> >
sjnbc> "This e-mail may contain confidential information and may be
legally
sjnbc> privileged and is intended only for the person to whom it is
addressed. If
sjnbc> you are not the intended recipient, you are notified that you may not
use,
sjnbc> distribute or copy this document in any manner whatsoever. Kindly
also
sjnbc> notify the sender immediately by telephone, and delete the e-mail.
When
sjnbc> addressed to clients of the company from where this e-mail originates
("the
sjnbc> sending company ") any opinion or advice contained in this e-mail is
subject
sjnbc> to the terms and conditions expressed in any applicable terms of
business or
sjnbc> client engagement letter . The sending company does not accept
liability for
sjnbc> any damage, loss or expense arising from this e-mail and/or from the
sjnbc> accessing of any files attached to this e-mail."
Thanks
----
syv@911networks.com
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:58 GMT-3