From: Brian McGahan (brian@cyscoexpert.com)
Date: Fri Sep 20 2002 - 13:21:37 GMT-3
Kevin,
CDP will run on any media that supports a SNAP header. CDP is
globally enabled by default. To enable/disable it use the global command
'[no] cdp run'. To enable/disable it on an interface, use the interface
command '[no] cdp enable'
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
brian@cyscoexpert.com
CyscoExpert Corporation
Internetwork Consulting & Training
http://www.cyscoexpert.com
Voice: 847.674.3392
Fax: 847.674.2625
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> kevin
> Sent: Friday, September 20, 2002 10:44 AM
> To: ccielab@groupstudy.com
> Subject: cdp nei on FR
>
> Hi,
>
> How can routers become cdp nei on FR ?
>
> Thanks
>
> Kevin
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:58 GMT-3