From: elping (elpingu@acedsl.com)
Date: Thu Sep 19 2002 - 17:02:54 GMT-3
on the token ring side
enable multiring all
and tranparent bridging
"VANGADASALAM,SURENDRAN (HP-Singapore,ex4)" wrote:
> Hi Group,
> I have a problem with my SR/TLB configuration.
>
> R8-------(Token Ring)---------R13--------(Ethernet)---R14
>
> I am trying to ping from the R8 to R14. But am unable to do so. The token
> ring is connected to 3920 switch. Below is the configuration. I have also
> turned off IP routing in R13.
>
> Router 13
>
> source-bridge ring-group 10
> source-bridge transparent 10 11 1 1
> !
> interface Ethernet0/0
> ip address 1.1.1.3 255.255.255.0
> no ip route-cache
> half-duplex
> bridge-group 1
> !
> interface TokenRing0/0
> ip address 1.1.1.4 255.255.255.0
> no ip route-cache
> ring-speed 16
> source-bridge 1 1 10
>
> Router 8
>
> interface TokenRing4/0
> ip address 1.1.1.2 255.255.255.0
> ring-speed 16
>
> Router 14
>
> interface Ethernet 0/0
> ip address 1.1.1.1 255.255.255.0
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:58 GMT-3