From: Frank Maisano (FrankM@netarch.com)
Date: Tue Sep 24 2002 - 13:41:27 GMT-3
As for #1, can you supply a little more info? If your interfaces are
covered in your network statements, they will be advertised. You may be
able to use distribute-lists to filter.
#2 On router 2 use default-information originate
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/np1_r
/1rprt1/1rrip.htm#xtocid2
--Frank
-----Original Message-----
From: Young Bae [mailto:ybae@cisco.com]
Sent: Monday, September 23, 2002 3:23 PM
To: ccielab@groupstudy.com
Subject: EIGRP Query and RIP default route
I have two quick questions:
1. In EIGRP, how do I configure a router not to query for routes that are
not directly attached to its neighbor?
2. If R1 and R2 is running RIP v1 between them, and R2 is also running
OSPF, how do I configure R2 to provide a default route for R1, as long as
R2 learns about a route x.x.x.x?
Thanks in advance.
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:01 GMT-3