From: Michael Snyder (msnyder@revolutioncomputer.com)
Date: Wed Sep 25 2002 - 11:04:56 GMT-3
I don't know why this works, but I do know it does work as listed below.
With CHAP.
Router 1
User router1 pass 0 pass1
User router2 pass 0 pass2
Router 2
User router1 pass 0 pass2
User router2 pass 0 pass1
Basically your transpose the passwords on one of the routers.
With PAP.
Router 1
User router1 pass 0 pass1
User router2 pass 0 pass2
Router 2
User router1 pass 0 pass1
User router2 pass 0 pass2
You don't transpose the passwords with pap, just a one to one
relationship.
Also I always use a ppp alternative host name command, so I don't have
to worry about the router's name. Basically, I cut and paste the above
to the routers, name them router1 and router2 using the ppp alternative
host name command and it works.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jaksec, Nick
Sent: Tuesday, September 24, 2002 1:00 PM
To: ccielab@groupstudy.com
Subject: PPP CHAP Password
When setting the hostname and password under the BRI interface (PPP CHAP
Hostname & PPP CHAP Password) it does not authenticate to the neighbor
router. I am placing the username and password on the remote router to
the
hostname and password correctly but it will not accept the new password.
Does anybody have any suggustions ??
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:03 GMT-3