From: elping (elpingu@acedsl.com)
Date: Mon Sep 23 2002 - 23:09:56 GMT-3
larson:
i tried it first hand on a 10 meg only link on
a 2600 and 3600
only options available sde and 802.1q
Elping
"Larson, Chris" wrote:
> I thought you could do it only on 100 meg interfaces as well. As it turns
> out you can do it on any interface that is 10/100. So if you have a 10/100
> interface you can do it at 10 megs. You cannot do it with 10 meg only
> interfaces.
>
> > -----Original Message-----
> > From: elping [SMTP:elpingu@acedsl.com]
> > Sent: Monday, September 23, 2002 12:02 AM
> > To: Ahmed Al-Ghawas
> > Cc: Peng Zheng; ccielab@groupstudy.com
> > Subject: Re: Is it possible to config bridge under sub-interface
> > for2500 series router?
> >
> > I think i did mention that 100 meg was needed to complete this task...This
> > is
> > what i have known and read...
> >
> > but I was able to configure on a 3600 router a 10 meg only interface the
> > following..
> > so i think it is possible my friend....
> >
> > r7#conf t
> > Enter configuration commands, one per line. End with CNTL/Z.
> > r7(config)#int e2/1.1
> > r7(config-subif)#en
> > r7(config-subif)#encapsulation ?
> > dot1Q IEEE 802.1Q Virtual LAN
> > sde IEEE 802.10 Virtual LAN - Secure Data Exchange
> >
> > r7(config-subif)#encapsulation dot1Q ?
> > <1-4095> IEEE 802.1Q VLAN ID required, range 1 - 0xFFF.
> >
> > r7(config-subif)#encapsulation dot1Q 1 ?
> > <cr>
> >
> > r7(config-subif)#encapsulation dot1Q 1
> >
> >
> >
> >
> >
> > Ahmed Al-Ghawas wrote:
> >
> > > Regardless of the router model, you can only configure isl on an 100Mbps
> > > port. Configure it on an 10Mpbs port is not possible.
> > >
> > > HTH
> > >
> > > Ahmed
> > >
> > > ----- Original Message -----
> > > From: "Peng Zheng" <zpnist@yahoo.com>
> > > To: <ccielab@groupstudy.com>
> > > Sent: Saturday, September 21, 2002 9:07 PM
> > > Subject: Is it possible to config bridge under sub-interface for 2500
> > series
> > > router?
> > >
> > > > Hi,
> > > >
> > > > I tried, but it said sde or isl encapsulation is
> > > > required. But it's not a choices under the interface.
> > > >
> > > > Thank you for help.
> > > >
> > > > Best Wishes,
> > > > Peng Zheng
> > > >
> > > > __________________________________________________
> > > > Do you Yahoo!?
> > > > New DSL Internet Access from SBC & Yahoo!
> > > > http://sbc.yahoo.com
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:03 GMT-3