From: Brian Dennis (brian@5g.net)
Date: Wed Sep 25 2002 - 15:26:28 GMT-3
It's a known issue with the command. That's why Cisco doesn't recommend
using the command on production routers if at all possible.
Also you might try "no alias exec csim reload" in the global config ;-)
Brian Dennis, CCIE #2210 (R&S/ISP Dial)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tu Nguyen
Sent: Wednesday, September 25, 2002 10:44 AM
To: ccielab@groupstudy.com
Subject: Router Reboot Upon Input csim star
Hi,
Have any seen this before? Upon inserting the csim star command, the
router got reboot!!
Thanks,
Tu
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.0(7)T, RELEASE
SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:21 by phanguye
Image text-base: 0x80008088, data-base: 0x80C524F8
cisco 2621 (MPC860) processor (revision 0x102) with 53248K/12288K bytes
of memory.
Processor board ID JAB04130735 (3364644779)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
2 Voice FXS interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
---------------------------------------------------------
R1#csim star 3159
csim: called number = 3159, loop count =
*** System received a SegV exception ***
signal= 0xb, code= 0x1100, context= 0x81321d28
PC = 0x0, Vector = 0x1100, SP = 0x8166df00
*** Unexpected Console tx-ready interrupt ***
PC = 0xfff03fc4, Vector = 0x500, SP = 0x81322f34
System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 65536 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x6fdb4c
Self decompressing the image :
########################################################################
###############################################################
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:03 GMT-3